AC3210 Amplifier
The AC3210 amplifier is based on the latest technology and delivers an incredible all-around performance, flexibility and cost-efficiency. Take a closer look at one of the most intelligent amplifiers on the market. Find out that the clever choice can be a practical one too.
The AC3210 is an intelligent dual active output amplifier with 48 dB maximum gain and frequency support up to 1.2GHz downstream and 258 MHz upstream. The latest GaN technology offers high output levels (Umax 115.0 dBμV, 112 channels).
Easy management even on the site
Always in control
Power supply unit with active power factor correction
Easy upgrading
Removing barriers with RIS
Product Specifications
Downstream signal path (values with diplex filters)
Frequency range
85…1218 MHz
Return loss
20 dB
Maximum gain
2 x 48 dB
Nominal interstage slope, distribution mode
13 dB
Nominal interstage slope, trunk mode
7 dB
Input gain control
-20…0 dB
Input slope control
0…20 dB
Interstage gain control, ALC
-10…0 dB
Interstage gain control, output
-10…0 dB
Interstage slope control
3…19 dB
Flatness
±0.5 dB
Group delay
2 ns
Test point
-20 dB
Transponder connection
-19 dB
Input by-pass attenuation
-2.5 dB
Noise figure
8.5 dB
Umax(112 x QAM channels) @ 1.0 GHz
115.0 dBµV
Umax(138 x QAM channels) @ 1.2 GHz
112.0 dBµV
CTB 41 channels
118.0 dBµV
CSO 41 channels
119.0 dbµV
Upstream signal path (values with diplex filters)
Frequency range
5…204 MHz
Return loss
18 dB
Maximum gain
2 x 28 dB
Ingress switching
0 / -6 / < -45 dB
Gain control
0…28 dB
Slope control
0…15 dB
Flatness
±0.5 dB
Transponder connection
-37 dB
Noise figure
9.5 dB
General
Power consumption (65 & 90 / 230 VAC)
39 / 41 W
Supply voltage
27…65 / 40…90 / 205…255 VAC
Maximum current feed through
7.0 A / port
Hum modulation
70 dB
Resistance for remote current
25 mΩ / port
Input/Output connectors
PG11 thread, other types available
Test point connectors
F female
Dimensions (h x w x d)
245 mm x 255 mm x 107 mm
Weight
3.9 kg
Operating temperature
-40…+55 °C
Class of enclosure
IP67
Environmental (salt mist, cyclic)
IEC 60068-2-52, severity 1
Safety
EN60728-11 / EN60065
EMC
EN50083-2
ESD
4 kV
Surge
6 kV (EN 60728-3)
